LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> SX4 LE, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Electrical Control System >> Diagnostic Information and Procedures >> DTC Clearance >> Without Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without Using SUZUKI Scan Tool

  1. Turn ignition switch to OFF position.
  2. Perform following Steps  a) to  d) within 10 seconds after ignition switch is turned ON and engine stops.
    1. Turn headlight switch to "SMALL" position.
    2. Turn headlight switch to "OFF" position.
    3. Repeat Steps  a) and  b) 3 times.
    4. Press and release driver side door switch 4 times.
  3. After completing above Steps, confirm that no malfunction DTC is detected.
scientia non olet · About LEMON Manuals