LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> SX4 Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Gear Shift and Select Shaft Assembly Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gear Shift and Select Shaft Assembly Removal and Installation: Removal

  1. Remove battery and tray with ECM see ENGINE CONTROL MODULE (ECM) REMOVAL AND INSTALLATION .
  2. Disconnect gear shift and gear select control cables from transaxle, see Gear Shift Control Lever and Cable Removal and Installation .
  3. Remove gear shift interlock bolt (1) and gear shift locating spring (2).
  4. Remove gear shift & select shaft assembly (3).
    Fig 1: Identifying Gear Shift Interlock Bolt And Gear Shift Locating Spring
    G06868614Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals