DTC Confirmation Procedure
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
- Select a level road with no traffic to minimize the risk of accident.
- Perform the test extremely carefully.
- Perform the road test using 2 persons, a driver and an assistant.
NOTE:
If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Warm up engine to normal operating temperature.
- Drive vehicle at 100 km/h (62 mile/h) for 1 min. (Keep throttle valve opening constantly in this step.
- Release accelerator pedal, and keep vehicle coasting for 10 sec. with engine braking applied. (fuel cut condition)