DTC Detecting Condition and Trouble Area
DIAGNOSTIC INFORMATION AND PROCEDURES REFERENCE CHART
| DTC detecting condition |
Trouble area |
P0482: Fan 3 Control Circuit
This DTC is detected if any one of the following conditions is met.
- Monitor signal of A/C condenser cooling fan relay drive circuit is high level (OFF) for 5 sec. even if command signal of radiator cooling fan is at high speed.
- Monitor signal of A/C condenser cooling fan relay drive circuit is low level (ON) for 5 sec. even if command signal of radiator cooling fan is NOT at high speed.
(2 D/C detection logic but MIL does not light up) |
- A/C condenser fan relay (coil side) and/or its circuit
- ECM
|