Trunk Lid Lock Assembly Removal and Installation (Sedan): Installation

Reverse removal procedure to install trunk lid lock assembly noting the following instruction.

• Tighten trunk lid latch bolt (1) to specified torque.

  Tightening torque 

  Trunk lid latch bolt (a): 4.5 N.m (0.45 kg-m, 3.5 lbf-ft) 

  Fig 1: Identifying Trunk Lid Latch Bolts

  Courtesy of SUZUKI OF AMERICA CORP.
• Adjust trunk lid latch striker (1) so that its center aligns with the center of groove in trunk lid latch base (2).

  Tightening torque 

  Trunk lid latch striker bolt (a): 4.5 N.m (0.45 kg-m, 3.5 lbf-ft) 

  Fig 2: Adjusting Trunk Lid Latch Striker

  Courtesy of SUZUKI OF AMERICA CORP.