LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> SX4 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Program >> Diagnostic Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

WARNING: If you do not select a suitable route and take proper precautions when performing a road test, an accident can occur.
  • Select a level road with no traffic to minimize the risk of accident.
  • Perform the test extremely carefully.
  • Perform the road test using 2 persons, a driver and an assistant.
  1. Connect SUZUKI scan tool to DLC in the same manner as when making this connection for DTC check.
  2. Turn ignition switch to ON position.
  3. Erase DTC according to instructions displayed on scan tool. Refer to SUZUKI scan tool operators manual for further details.
  4. After completing the clearance, turn ignition switch OFF and disconnect SUZUKI scan tool from DLC.
  5. Perform "DRIVING TEST " (Step 2 of ELECTRONIC STABILITY PROGRAM CHECK ) and DTC Check and confirm that NO DTC is displayed on SUZUKI scan tool.
scientia non olet · About LEMON Manuals