LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> SX4 Base, Automatic CVT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Repair Instructions >> Secondary Pulley Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Pulley Speed Sensor Removal and Installation: Removal

  1. Disconnect negative cable from battery.
  2. Remove air cleaner assembly. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION
  3. Detach wire harness (1) from transaxle.
  4. Remove secondary pulley speed sensor (2) from transaxle.
  5. Disconnect connector from secondary pulley speed sensor.
    Fig 1: Identifying Secondary Pulley Speed Sensor
    G06866792Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals