September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Engine Coolant Temperature (ECT) Sensor Removal and Installation: Removal
- Remove air cleaner assembly. See AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION
- Disconnect negative cable at battery.
- Drain coolant. See COOLING SYSTEM DRAINING
.
WARNING:
To avoid danger of being burned, do not remove radiator cap while engine and radiator are still hot.
Scalding fluid and steam can be blown out under pressure if cap is taken off too soon.
- Disconnect connector from ECT sensor (1).
Courtesy of SUZUKI OF AMERICA CORP.
- Remove ECT sensor from water outlet cap.