OCM with Sensor Mat Inspection

OCM with Sensor Mat Inspection

NOTE:

The OCM with sensor mat will not work properly if it is separated from the front passenger seat cushion assembly.

If the OCM with sensor mat is found faulty, replace the front passenger seat cushion assembly with a new one. Do not try to replace the OCM with sensor mat as a separate part.

If any faulty condition is found in the following checks, replace.

- Check OCM connector for damage, cracks or lock mechanism.
- Check OCM terminal for bend, corrosion or rust.
- Check that the surface of the front passenger seat is free from hard bend or tear.