LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Kizashi SE, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Diagnostic Information and Procedures >> DTC P0703: Brake Switch "B" Circuit >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING:
  • Perform ROAD TEST  in a place where there is no traffic to prevent an accident.
  • Road test should be performed by two persons, a driver and a tester, on a level road.
NOTE: Be sure to troubleshoot first unexpected DTCs previously detected in "DTC Confirmation Procedure".
  1. Drive vehicle at more than 40 km/h (25 mile/h) for 20 sec.
  2. Stop vehicle.
  3. Push engine switch to change ignition mode to "OFF", and leave ignition mode in "OFF" for 10 sec.
  4. Push engine switch to change ignition mode to "ON".
  5. Repeat Step  1) through  2) twice.
scientia non olet · About LEMON Manuals