Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Clutch bleeder plug | 5.0 | 0.5 | 4.0 |
| CPP switch lock nut | 7.5 | 0.76 | 5.5 |
| Clutch master cylinder nut | 13 | 1.3 | 9.5 |
| Clutch operating cylinder assembly mounting bolt | 10 | 1.0 | 7.5 |
| Clutch fluid pipe flare nut | 16 | 1.6 | 12.0 |
NOTE:
The specified tightening torque is described in the following.
CLUTCH PEDAL ASSEMBLY COMPONENTS
CLUTCH PEDAL ASSEMBLY COMPONENTS
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .