Starting Motor Removal and Installation: Installation
WARNING: This page is about a different car, the 2010 Suzuki Kizashi. However, it is still accessible from the selected car via links, so may be relevant.
Reference: STARTING MOTOR INSPECTION
Reverse removal procedure, noting the following points.
- Tighten starting motor mounting bolts (3) and starting motor cable nut (5) to specified torques.
Tightening torque
Starting motor cable nut (a): 11 N.m (1.1 kg-m, 8.5 lbf-ft)
Starting motor mounting bolt (b): 45 N.m (4.6 kg-m, 33.5 lbf-ft)