CVT System Check: Notes

Step	Action	YES	NO
1	Customer complaint analysis  Perform CUSTOMER COMPLAINT ANALYSIS . Was customer complaint analysis performed?	Go to Step 2.	Perform CUSTOMER COMPLAINT ANALYSIS .
2	DTC/freeze frame data check, record and clearance  Check for DTC (including pending DTC). Is there any DTC(s)?	Print DTC and freeze frame data or write them down and clear them by referring to DTC CLEARANCE . Then go to Step 3.	Go to Step 4.
3	Visual inspection  Perform VISUAL INSPECTION . Is there any faulty condition?	Repair or replace malfunction part. Then go to Step 11.	Go to Step 5.
4	Visual inspection  Perform VISUAL INSPECTION . Is there any faulty condition?	Repair or replace malfunction part. Then go to Step 11.	Go to Step 8.
5	Trouble symptom confirmation  Confirm trouble symptom. Is trouble symptom identified?	Go to Step 6.	Go to Step 7.
6	Rechecking and recording of DTC/freeze frame data  Recheck for DTC (current and pending DTC) and freeze frame data. Is there any DTC(s)?	Go to Step 9.	Go to Step 8.
7	Rechecking and recording of DTC/freeze frame data  Recheck for DTC and freeze frame data. Is there any DTC(s)?	Go to Step 9.	Go to Step 10.
8	CVT basic check and CVT symptom diagnosis  Perform CVT BASIC CHECK  and CVT SYMPTOM DIAGNOSIS . Are check and repair completed?	Go to Step 11.	Check and repair malfunction part(s). Then go to Step 11.
9	Troubleshooting for DTC  Perform troubleshooting for applicable DTC. Are check and repair completed?	Go to Step 11.	Check and repair malfunction part(s). Then go to Step 11.
10	Intermittent problems check  Check for intermittent problem. Is there any faulty condition?	Repair or replace malfunction part(s). Then go to Step 11.	Go to Step 11.
11	Final confirmation test  Perform FINAL CONFIRMATION TEST . Is there any problem symptom, DTC or abnormal condition?	Go to Step 6.	End.