C1163

DTC C1163

DTC Detecting Condition and Trouble Area






DTC Confirmation Procedure

1) Push engine switch to change ignition mode to "ON".

DTC Troubleshooting


1. Was "EPS System Check" performed?
YES
Go to Step 2.
NO
Go to "EPS System Check".
2. Steering angle sensor check
Check steering angle sensor. Steering Angle Sensor Inspection
Is it in good condition?
YES
Substitute a known-good P/S control module and recheck DTC. Service and Repair
NO
Replace steering angle sensor. Steering Angle Sensor Removal and Installation