Commercial Service Tools (Transmission)
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
| Tool name |
- |
Description |
| Puller |
|
- Removing companion flange
- Removing mainshaft rear bearing
|
| Puller |
|
- Removing mainshaft rear bearing
|
| Pin punch |
|
- 6 mm (0.24 in) dia.
|
| Power tool |
|
|
| Tool name |
- |
Description |
| Power tool |
|
Loosening bolts and nuts |
| Drift |
|
Installing manual shaft seals
- 22 mm (0.87 in) dia.
|
| Drift |
|
Installing rear oil seal (4WD models)
- 64 mm (2.52 in) dia.
|
| Pin punch |
|
- Removing retaining pin
- Installing retaining pin
- 4 mm (0.16 in) dia.
|
| Tool name |
- |
Description |
| Puller |
|
- Removing counter gear rear end bearing
- Removing reverse synchronizer hub
- Removing reverse cone
- Removing reverse gear bushing
- Removing reverse counter gear
|
| Power tool |
|
Loosening bolts and nuts |