LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Premium, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Transfer) >> Diagnostic Information and Procedures >> SDT Function (4WD) >> DTC Check Mode >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect "SDT".
  2. With engine at idle, touch "DTC check".

    Display shows malfunction experienced since the last erasing operation.

    NOTE: The details for "TIME" are as follows:
    • "0": Error currently detected with transfer control unit.
    • Except for "0": Error detected in the past and memorized with transfer control unit.

      Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").