Detailed Flow
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | GET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred). |
GO TO 2 | - |
| 2 | CONFIRM THE SYMPTOM Try to confirm the symptom described by the customer. Verify relation between the symptom and the condition when the symptom is detected. |
GO TO 3 | - |
| 3 | DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE Inspect according to Diagnostic Procedure of the system. Is malfunctioning part detected? |
GO TO 4 | GO TO 2 |
| 4 | REPAIR OR REPLACE THE MALFUNCTIONING PART
|
GO TO 5 | - |
| 5 | FINAL CHECK Refer to confirmed symptom in step 2, and make sure that the symptom is not detected. Has the symptom been repaired? |
Inspection End. | GO TO 2 |