LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Lighting Systems) >> Diagnostic Information and Procedures >> SDT Function (IPDM E/R) >> Data List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR ITEM DESCRIPTION

Monitor Item [Unit] MAIN SIGNALS Description
MOTOR FAN REQ [1/2/3/4] x Indicates cooling fan speed signal received from ECM on CAN communication line
A/C COMP REQ [OFF/ON] x Indicates A/C compressor request signal received from ECM on CAN communication line
TAIL&CLR REQ [OFF/ON] x Indicates position light request signal received from BCM on CAN communication line
HL LO REQ [OFF/ON] x Indicates low beam request signal received from BCM on CAN communication line
HL HI REQ [OFF/ON] x Indicates high beam request signal received from BCM on CAN communication line
FR FOG REQ [OFF/ON] x Indicates front fog light request signal received from BCM on CAN communication line
FR WIP REQ [STOP/1LOW/LOW/HI] x Indicates front wiper request signal received from BCM on CAN communication line
WIP AUTO STOP [STOP P/ACT P] x Indicates condition of front wiper auto stop signal
WIP PROT [OFF/Block] x Indicates condition of front wiper fail-safe operation
ST RLY REQ [OFF/ON]   Indicates starter request signal received from ECM on CAN communication line
IGN RLY [OFF/ON] x Indicates condition of ignition relay
RR DEF REQ [OFF/ON] x Indicates rear defogger request signal received from AV control unit on CAN communication line
OIL P SW [OPEN/CLOSE]   Indicates condition of oil pressure switch
DTRL REQ [OFF]   Indicates daytime light request signal received from BCM on CAN communication line
THFT HRN REQ [OFF/ON]   Indicates theft warning horn request signal received from BCM on CAN communication line
HORN CHIRP [OFF/ON]   Indicates horn reminder signal received from BCM on CAN communication line