Component Function Check
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE CHART
| Step |
Action |
YES |
NO |
| 1 |
CHECK HEADLAMP (HI) OPERATION
- WITHOUT CONTULT-III
- Start IPDM E/R auto active test. Refer to
[DIAGNOSIS SYSTEM (IPDM E/R): DIAGNOSIS DESCRIPTION ].
- Check that the headlamp switches to the high beam.
NOTE:
HI/LO is repeated 1 second each when using the IPDM E/R auto active test.
- SDT
- Select "EXTERNAL LAMP" of IPDM E/R active test item.
- With the test item operating, check that the headlamp switches to high beam.
HI: Headlamp switches to the high beam.
OFF: Headlamp OFF
Does the headlamp switch to high beam? |
Headlamp (HI) circuit is normal. |
Refer to
[Diagnosis Procedure ]. |