DTC Detecting Condition and Trouble Area
P0340 DTC DETECTING CONDITION CHART
| DTC detecting condition |
Trouble area |
P0340: Camshaft Position Sensor "A" Circuit
This DTC is detected if any one of the following conditions is met.
- CMP sensor pulse is less than 20 pulses per crankshaft 8 revolutions
- CMP sensor pulse is more than 28 pulses per crankshaft 8 revolutions
- CMP sensor pulse is less than 20 pulses between BTDC 75° and BTDC 5° with in crankshaft 8 revolutions from engine start.
(1 D/C detection logic) |
- CMP sensor and/or its circuit
- Signal rotor
- ECM
|