Component Function Check

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before performing the diagnosis, check that the following is normal.

Battery saver output/power supply circuit
Ignition keyhole illumination bulb

DIAGNOSIS PROCEDURE CHART

Step	Action	YES	NO
1	CHECK IGNITION KEYHOLE ILLUMINATION OPERATION SDT Turn the ignition switch ON. Select "IGN ILLUM" of BCM (INT LAMP) active test item. While operating the test item, check that the ignition keyhole illumination turns ON/OFF ON: Ignition keyhole illumination ON OFF: Ignition keyhole illumination OFF Is the inspection result normal?	Ignition keyhole illumination circuit is normal.	Refer to [Diagnosis Procedure ].