DTC Troubleshooting

P2227 DIAGNOSIS PROCEDURE

Step	Action	YES	NO
1	Was "Engine and Emission Control System Check" performed?	Go to Step 2.	Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK:J24B .
2	EVAP leak check pressure sensor check Check EVAP leak check pressure sensor for performance referring to "EVAP LEAK CHECK PRESSURE SENSOR (COMBINE WITH BARO SENSOR) INSPECTION ". Is it in good condition?	Go to Step 3.	Replace EVAP leak check module.
3	EVAP system check Check the following parts for clogging. EVAP canister EVAP canister air suction filter EVAP passage EVAP vent valve in EVAP leak check module Are they in good condition?	Go to Step 4.	Clean, repair or replace defective parts.
4	EVAP leak check pressure sensor circuit check Check EVAP leak check pressure sensor circuit referring to step 2 through 5 of P2228 and P2229 . Is it in good condition?	Substitute a known-good ECM and recheck.	Repair or replace defective wire harness.