LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Immobilizer Control System) >> Diagnostic Information and Procedure >> ECM Re-Communicating Function: Special Repair Requirement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Re-Communicating Function: Special Repair Requirement

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE

Step Action YES NO
1  PERFORM ECM RE-COMMUNICATING FUNCTION 
  1. Install ECM.
  2. Using a registered key (*2), turn ignition switch to "ON". *2: To perform this step, use the key that has been used before performing ECM replacement.
  3. Maintain ignition switch in "ON" position for at least 5 seconds.
  4. Turn ignition switch to "OFF".
  5. Start engine.

Can engine be started? 		 Procedure is completed. Initialize control unit. Refer to SDT Operation Manual.
scientia non olet · About LEMON Manuals