DTC Troubleshooting
P011B DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK:J24B . |
| 2 | ECT sensor circuit check
Are they in good condition? |
Go to Step 3. | Repair or replace defective wire harness. |
| 3 | IAT sensor circuit check
Are they in good condition? |
Go to Step 4. | Repair or replace defective wire harness. |
| 4 | ECT sensor check
Is it in good condition? |
Go to Step 5 | Replace ECT sensor. |
| 5 | IAT sensor check
Is it in good condition? |
Substitute a known-good ECM and recheck. | Replace MAF and IAT sensor. |