LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Limited, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Electrical Devices >> Repair Instructions >> VIN (Vehicle Identification Number) Registration (EVAP-Leak-Check Model)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VIN (Vehicle Identification Number) Registration (EVAP-Leak-Check Model)

  1. Connect SUZUKI scan tool to data link connector (DLC) (1) located on underside of instrument panel at drive's seat side.

    Special Tool 

    (A): SUZUKI scan tool (SUZUKI-SDT) 

    Fig 1: Connecting Scan Tool To Data Link Connector
    G06492586Courtesy of SUZUKI OF AMERICA CORP.
  2. Check VIN shown on left of instrument panel.
  3. Turn ignition switch to ON position.
  4. Select "VIN registration" mode of SUZUKI scan tool.
  5. Register VIN according to the instructions indicated on the SUZUKI scan tool.
    NOTE: For further details, refer to the operator's manual for SUZUKI scan tool.
  6. Before completing VIN registration, confirm that VIN data indicated on SUZUKI scan tool is correct. If not, re-register VIN data into ECM correctly.
scientia non olet · About LEMON Manuals