Upper Arm/Bushing Disassembly and Assembly: Disassembly

Cut rubber (1) of flange of upper arm bushing.
Using grinder (2), grind off flange (3) of upper arm bushing.
CAUTION: If you grind the flange (3) of upper arm bushing too much, you will damage the upper arm (4). Limit the amount of grinding to the minimum amount necessary.

Fig 1: Grinding Upper Arm Bushing Using Grinder
Courtesy of SUZUKI OF AMERICA CORP.
Push out upper arm bushing by using hydraulic press (1) and special tool.
Special Tool

(A): 09913-68711

Fig 2: Pushing Upper Arm Bushing Using Hydraulic Press
Courtesy of SUZUKI OF AMERICA CORP.