Control Rod/Bushing Disassembly and Assembly: Assembly

Press-fit control rod bushing (1) by using press (2) and special tool.
CAUTION: Any removed bushing will not fit properly if you reuse it. Always use a new bushing.

Special Tool

(A): 09913-85210

Fig 1: Pressing Control Rod Bushing Using Press And Special Tool
Courtesy of SUZUKI OF AMERICA CORP.
Press-fit bushing so that dimensions "A" and "B" in figure become equal.

Fig 2: Identifying Bush Dimensions
Courtesy of SUZUKI OF AMERICA CORP.