Tightening Torque Specifications

CAUTION: For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".

TIGHTENING TORQUE SPECIFICATIONS

Fastening part	Tightening torque			Note
Fastening part	N.m	kgf-m	lbf-ft	Note
Tie-rod end lock nut	65	6.5	47.0	Front Wheel Alignment Inspection and Adjustment
Strut bracket nut	135	13.5	98.0	Front Strut Assembly Removal and Installation Steering Knuckle Removal and Installation
Brake hose mounting bolt	25	2.5	18.0	Front Strut Assembly Removal and Installation
Stabilizer joint nut	60	6.0	43.5	Front Strut Assembly Removal and Installation Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Front wheel speed sensor harness clamp bolt	11	1.1	8.5	Front Strut Assembly Removal and Installation
Strut support nut	50	5.0	36.5	Front Strut Assembly Removal and Installation
Strut nut	70	7.0	51.0	Front Strut Assembly Disassembly and Assembly
Wheel hub housing bolt	50	5.0	36.5	Front Wheel Hub Assembly Removal and Installation
Drive shaft nut	220	22.0	159.5	Front Wheel Hub Assembly Removal and Installation Suspension Control Arm Removal and Installation
Suspension control arm ball joint nut	55	5.5	40.0	Steering Knuckle Removal and Installation Suspension Control Arm Removal and Installation
Front wheel speed sensor bolt	11	1.1	8.5	Steering Knuckle Removal and Installation
Wheel nut	100	10.0	72.5	Front Wheel Hub, Disc, Nut and Bearing Check
Suspension control arm nut	128	13.1	94.5	Suspension Control Arm Removal and Installation
Stabilizer bar mounting bracket bolt	50	5.0	36.5	Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Suspension frame mounting bolt	128	13.1	94.5	Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Engine front body side mounting nut	55	5.5	40.0	Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Pipe bracket bolt	11	1.1	8.5	Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation
Union gear box bolt	35	3.5	25.5	Front Suspension Frame, Stabilizer Bar and/or Bushings Removal and Installation

NOTE: The specified tightening torque is also described in the following.
FRONT SUSPENSION CONSTRUCTION
FRONT STRUT ASSEMBLY COMPONENTS
FRONT WHEEL HUB ASSEMBLY AND STEERING KNUCKLE COMPONENTS
FRONT SUSPENSION FRAME, STABILIZER BAR AND/OR BUSHINGS COMPONENTS

Reference:

For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .