LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Heating And Air Conditioning System) >> Repair Instructions >> Refrigerant Pressure Sensor: Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Refrigerant Pressure Sensor: Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to [HFC-134A (R-134A) SERVICE PROCEDURE ].
  2. Disconnect the refrigerant pressure sensor harness connector.
    Fig 1: Identifying Refrigerant Pressure Sensor
    G06443277Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the refrigerant pressure sensor from the condenser.
    CAUTION: Be careful not to damage the condenser fins.
scientia non olet · About LEMON Manuals