Operating Cylinder: Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Operating cylinder bolts 35.3 N.m (3.6 kg-m, 26 ft-lb)

Tighten the clutch hose fitting to the specified torque.
Clutch hose fitting Refer to [ Clutch Piping: Exploded View ].

CAUTION: Make sure the clutch hose is not bent or twisted.
After installation, bleed the clutch hydraulic system. Refer to [CLUTCH FLUID: BLEEDING ].