Transfer Fluid: Replacement: Filling

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

Remove the filler plug and gasket.
Fill the transfer with new fluid until the fluid level reaches the specified limit near the filler plug hole.

Fig 1: Filling Transfer With New Fluid Until Fluid Level Reaches Specified Limit Near Filler Plug Hole
Courtesy of SUZUKI OF AMERICA CORP.

Fluid grade and capacity: Refer to [ RECOMMENDED FLUIDS AND LUBRICANTS [FOR USA AND CANADA] ] (United States and Canada), [ RECOMMENDED FLUIDS AND LUBRICANTS [FOR MEXICO] ] (Mexico).

CAUTION: Carefully fill fluid. (Fill up for approx. 3 minutes.)
Leave the vehicle for 3 minutes, and check fluid level again.
Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to [Transfer Assembly: Exploded View ]
CAUTION: Do not reuse gasket.