Fluid Leakage And Fluid Level

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that fluid is not leaking from the transfer assembly or around it.
Check fluid level from the filler plug hole as shown.

Fig 1: Checking Fluid Level From Filler Plug Hole
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Do not start engine while checking fluid level.
Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to [Transfer Assembly: Exploded View ]
CAUTION: Do not reuse gasket.