Planetary Carrier: Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

Apply ATF to the new metal bushing, then install the new metal bushing until it becomes "Dimension A" using Tool.

Fig 1: Installing Metal Bushing
Courtesy of SUZUKI OF AMERICA CORP.

Tool number: ST35300000 (-)

Dimension A: 7.7 - 8.3mm (0.303 - 0.327in)

CAUTION: Do not reuse metal bushing.
Apply ATF to the new needle bearing, then install the new needle bearing until it becomes "Dimension B" using Tool.

Fig 2: Installing Needle Bearing
Courtesy of SUZUKI OF AMERICA CORP.

Tool number: ST33220000 (-)

Dimension B: 62.5 - 63.1mm (2.461 - 2.484in)

CAUTION: Do not reuse needle bearing.
Install the carrier bearing to the sun gear using Tools.

Fig 3: Installing Carrier Bearing
Courtesy of SUZUKI OF AMERICA CORP.

Tool number A: ST30720000 (J-25405)

B: ST27863000 (-)
Install the new snap ring to the sun gear assembly using suitable tool.

Fig 4: Installing Snap Ring To Sun Gear Assembly
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Do not reuse snap ring.
Install the sun gear assembly to the planetary carrier assembly.

Fig 5: Installing Sun Gear Assembly To Planetary Carrier Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the new snap ring to the planetary carrier assembly.
CAUTION: Do not reuse snap ring.