LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Security And Locks) >> Diagnostic Information and Procedures >> Hazard Function Circuit Check >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE

Step Action YES NO
1  CHECK HAZARD SWITCH CIRCUIT 
Operate the hazard lights by turning ON the hazard warning switch.
Do the lights operate normally? 		 Replace the BCM. Refer to [BCM (BODY CONTROL MODULE): REMOVAL AND INSTALLATION ] Repair or replace hazard warning switch circuit. Refer to [TURN SIGNAL AND HAZARD WARNING LAMP SYSTEM: WIRING DIAGRAM ]
scientia non olet · About LEMON Manuals