Front Brake Pad: Removal and Installation: Removal
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front wheel and tire. Refer to [TIRE ROTATION ]
- Remove master cylinder reservoir cap.
- Partially drain brake fluid.
- Remove caliper sliding pin bolts using power tool.
- Support the caliper body with a suitable wire to avoid pulling on the front brake hose.
- Remove the front inner and outer brake pads, shim, shim covers, pad return spring and retainers from the torque member.