LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Front Brake) >> Repair Instructions >> Brake Burnishing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Burnishing

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

Burnish brake contact surface according to the following procedure after refinishing or replacing rotors, after replacing pads, or if a soft pedal occurs at very low mileage.

CAUTION: Only perform this procedure under safe road and traffic conditions. Use extreme caution.
  1. Drive the vehicle on a straight smooth road at 50 km/h (31 MPH).
  2. Use medium brake pedal/foot effort to bring the vehicle to a complete stop from 50 km/h (31 MPH). Adjust brake pedal/foot pressure such that vehicle stopping time equals 3 to 5 seconds.
  3. To cool brake system, drive the vehicle at 50 km/h (31 MPH) for 1 minute without stopping.
  4. Repeat steps  1 to  3, 10 times or more to complete the burnishing procedure.
scientia non olet · About LEMON Manuals