Brake Master Cylinder: Removal and Installation: Installation
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Use new master cylinder assembly nuts for installation.CAUTION: Do not reuse the master cylinder assembly nuts.
- Refill the brake fluid and bleed the air. Refer to
[BRAKE FLUID: BLEEDING BRAKE SYSTEM ].CAUTION:
- Refill using recommended brake fluid. Refer to [BRAKE FLUID: DRAIN AND REFILL ].
- Do not reuse drained brake fluid.
- Adjust the brake pedal. Refer to [BRAKE PEDAL INSPECTION AND ADJUSTMENT ].
- Apply silicon grease to the brake booster at position (A) as shown when installing the master cylinder assembly to the brake booster.