Power Steering Oil Pump: Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Mount the power steering oil pump in a vise as needed.

Remove the joint bolt, joint and copper washers.
CAUTION: Do not reuse the copper washers.
On QR25DE model, remove connector and flow control valve with spring.
Remove the suction pipe and O-ring.
CAUTION: Do not reuse the O-ring.
Remove the pulley nut and pulley.
Remove the bracket bolts and bracket(s).