Generic Squeak and Rattle Troubleshooting: Doors
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
Pay attention to the:
- Finisher and inner panel making a slapping noise
- Inside handle escutcheon to door finisher
- Wiring harnesses tapping
- Door striker out of alignment causing a popping noise on starts and stops
Tapping or moving the components or pressing on them while driving to duplicate the conditions can isolate many of these incidents. You can usually insulate the areas with felt cloth tape or insulator foam blocks from the Squeak and Rattle Kit (J-43980) to repair the noise.