LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Immobilizer Control System) >> Repair Instructions >> Immobilizer System Antenna Amp.: Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Immobilizer System Antenna Amp.: Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal. Refer to [BATTERY: REMOVAL AND INSTALLATION ]
  2. Remove the lower instrument panel LH. Refer to [BODY SIDE TRIM: REMOVAL AND INSTALLATION ].
  3. Remove the immobilizer system antenna amp bolt (A).
    Fig 1: Identifying Immobilizer System Antenna Amp, Electrical Connector And Bolt
    G06446751Courtesy of SUZUKI OF AMERICA CORP.
  4. Disconnect the electrical connector (1) and remove the immobilizer system antenna amp (2).
scientia non olet · About LEMON Manuals