Front Combination Lamp: Removal
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
- Position front fender protector aside. Refer to [FRONT FENDER PROTECTOR: REMOVAL AND INSTALLATION ]
- For steel bumper, remove the front bumper upper valance. Refer to [FRONT BUMPER: REMOVAL AND INSTALLATION ].
- For plastic bumper, remove the front bumper assembly. Refer to [FRONT BUMPER: REMOVAL AND INSTALLATION ]
- Remove the front combination lamp bolts.
- Disconnect the front combination lamp connector and remove front combination lamp.