LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Grand Vitara Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Instrumentation/Driver Information/Horn) >> Diagnostic Information and Procedures >> Fuel Level Sensor Signal Circuit Check >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS PROCEDURE CHART

Step Action YES NO
1  COMBINATION METER INPUT SIGNAL 
  1. Select "Meter / M&A" on SDT.
  2. Using "FUEL METER" of "Data list", compare the value of data list with fuel gauge pointer of combination meter.

Does the data list value approximately match the fuel gauge indication? 		 Inspection End. Replace combination meter. Refer to [COMBINATION METER: REMOVAL AND INSTALLATION ].
scientia non olet · About LEMON Manuals