Service Replacement Passenger Air Bag Module
WARNING: This page is about a different car, the 2011 Suzuki Equator. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front passenger air bag module to the instrument panel pad assembly.
- Install the instrument panel assembly. Refer to [INSTRUMENT PANEL ASSEMBLY: REMOVAL AND INSTALLATION ]
- Connect the front passenger air bag module harness connector to yellow 4-pin service replacement air bag connector and fasten connector to mounting bracket.CAUTION:
- Always work from the side of or under front passenger air bag module.
- After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to [SRS OPERATION CHECK ].