DTC Confirmation Procedure
WARNING:
If you do not select a suitable route and take proper precautions when performing a road test. an accident can occur.
- Select a level road with no traffic to minimize the risk of accident.
- Perform the test extremely carefully.
- Perform the road test using 2 persons, a driver and an assistant.
NOTE:
- If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Check to make sure that the following condition is satisfied when using this procedure. - BARO > 75 kPa (0.8 kgf/cm2, 10.8 psi, 0.75 bar)
- Start engine and warm up to normal operating temperature.
- Accelerate vehicle to 80 km/h (50 mile/h) or more.