Reference waveform No. 1

Rear wiper signal (1)

WAVEFORM 1 REFERENCE

Measurement terminal

Rear wiper switch ON signal:
CH1: "G30-6" to "G30-12"
Rear wiper switch INT signal:
CH1: "G30-7" to "G30-12"

Oscilloscope setting

CH1: 5 V/DIV
TIME: 10 ms/DIV

Measurement condition

Rear wiper switch ON signal:

Ignition switch is at ON position, rear wiper switch is at any position other than LOW position

Rear wiper switch INT signal:

Ignition switch is at ON position, rear wiper switch is at any position other than INT position

Fig 1: Waveform 1 Signal Pattern

Courtesy of SUZUKI OF AMERICA CORP.