DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out by 2 persons, a driver and a tester, on a level road.
NOTE:
If DTC other than aimed DTC are previously detected in DTC confirmation procedure, be sure to troubleshoot DTC previously detected.
- Start engine and warm up to normal operating temperature.
- Drive vehicle at 1, 000 - 4, 000 RPM for 5 min. at 5th gear (M/T) or D range (A/T). (Keep throttle valve opening constantly in this step.)