DTC Troubleshooting
P0560 DIAGNOSIS PROCEDURE
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK:J24B . |
| 2 | Backup power supply circuit check
Is it in good condition? |
Check for intermittent trouble, see INTERMITTENT AND POOR CONNECTION INSPECTION
. If OK, substitute a known-good ECM and recheck. |
"B/U" fuse or "DOME" fuse blown, ECM backup power supply circuit is open or short to ground circuit, or charging system faulty. |