LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator RMZ-4 >> Repair and Diagnosis >> Transmission >> Transfer Case >> Diagnostic Information and Procedures >> SDT Function (4WD) >> DTC Check Mode >> Operation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Operation Procedure

  1. Connect "SDT".
  2. With engine at idle, touch "DTC check".

    Display shows malfunction experienced since the last erasing operation.

    NOTE: The details for "TIME" are as follows:
    • "0": Error currently detected with transfer control unit.
    • Except for "0": Error detected in the past and memorized with transfer control unit.

      Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").

scientia non olet · About LEMON Manuals