Transfer Fluid: Replacement: Filling

WARNING: This page is about a different variant/trim than selected.

Remove the filler plug and gasket.
Fill the transfer with new fluid until the fluid level reaches the specified limit near the filler plug hole.

Fig 1: Filling Transfer With New Fluid Until Fluid Level Reaches Specified Limit Near Filler Plug Hole
Courtesy of SUZUKI OF AMERICA CORP.

Fluid grade and capacity: Refer to [ RECOMMENDED FLUIDS AND LUBRICANTS [FOR USA AND CANADA] ] (United States and Canada), [ RECOMMENDED FLUIDS AND LUBRICANTS [FOR MEXICO] ] (Mexico).

CAUTION: Carefully fill fluid. (Fill up for approx. 3 minutes.)
Leave the vehicle for 3 minutes, and check fluid level again.
Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to [Transfer Assembly: Exploded View ]
CAUTION: Do not reuse gasket.