LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2011 >> Equator Base >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Monitoring System >> Repair Instructions >> ID Registration Procedure >> Id Registration Without Transmitter Activation Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Id Registration Without Transmitter Activation Tool

NOTE: This procedure must be done after replacement of a low tire pressure warning transmitter or BCM. New replacement transmitters are provided asleep and must first be woken up using Transmitter Activation Tool J-45295 before ID registration can be performed.
  1. Connect SDT.
  2. Select ID REGIST under BCM.
  3. Adjust the tire pressures to the values shown in the table and drive the vehicle at 40 km/h (25 MPH) or more for a few minutes.
    TIRE PRESSURE REFERENCE

    Tire position Tire pressure kPa (kg/cm2 , psi)
    Front LH 250 (2.5, 36)
    Front RH 230 (2.3, 33)
    Rear RH 210 (2.1, 30)
    Rear LH 190 (1.9, 27)
  4. After completing all ID registrations, press END to complete the procedure.
    ACTIVATION TIRE POSITION REFERENCE

    Activation tire position SDT
    Front LH YET
    ↓
    DONE
    Front RH
    Rear RH
    Rear LH
  5. Inflate all tires to proper pressure. Refer to [SERVICE DATA AND SPECIFICATIONS ]
scientia non olet · About LEMON Manuals